Skip to content
Independent · not a government site50 states + DCChecked Oct 24, 2026How we check · Corrections
JobNo rates saved
    Nothing saved yet

    Save a rate from any rate page. It lands here with its determination, ready for the rate sheet.

    Create account

    Home / Guides / Davis-Bacon classifications, conformance (SF 1444) and apprentices

    Davis-Bacon classifications, conformance and apprentices

    Workers on a Davis-Bacon job are paid the wage determination's rate for the classification of work they actually perform, "without regard to skill" (29 CFR 5.5(a)(1)(i)). When the determination has no classification for the work, the contractor requests one through conformance, on Standard Form 1444 (FAR 22.406-3). DOL rules within 30 days, and the rate is owed from the first day of that work.

    Checked on October 26, 2026 against eCFR (29 CFR 1.3, 1.5, 5.2 and 5.5; 48 CFR 22.406-3), DOL's WH-347 instructions and SAM.gov determinations TX20260031 and TX20260253. Published November 12, 2026.

    How are workers classified on a Davis-Bacon job?

    By the work, not the title or the person. Workers "must be paid the appropriate wage rate and fringe benefits on the wage determination for the classification(s) of work actually performed, without regard to skill" (29 CFR 5.5(a)(1)(i)). Someone who does two kinds of work in a week can be paid each rate for the hours in each, "Provided, That the employer's payroll records accurately set forth the time spent in each classification." Without that breakdown, DOL says "the worker must be paid for all hours worked using the highest applicable prevailing wage rate" (WH-347 instructions).

    Welders often have no line of their own. Harris County's building and heavy determinations list none and carry the note "WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental."

    What if the wage determination has no classification for the work?

    Determinations can be short. Harris County's heavy construction determination, TX20260031, has 19 rate lines, against 57 on the county's building determination, TX20260253. The heavy list has a pipefitter at $17.00 plus $0.04 four laborer lines and seven power equipment operator lines, but no painter and no roofer. The building determination lists a painter (brush, roller and spray) at $17.24 plus $4.41, but that rate covers the building work the contract assigns to the building determination, not heavy work.

    Each determination says unlisted classifications "may be added after award only as provided in the labor standards contract clauses." That process is conformance. The contracting officer "must require that any class of laborers or mechanics, including helpers, which is not listed in the wage determination and which is to be employed under the contract be classified in conformance with the wage determination" (29 CFR 5.5(a)(1)(iii)(A)). DOL's form instructions give the contractor's first step: "contact the Contracting Officer or Agency representative immediately" (WH-347 instructions).

    A conformance is allowed only when
    1. "The work to be performed by the classification requested is not performed by a classification in the wage determination"
    2. "The classification is used in the area by the construction industry"
    3. "The proposed wage rate, including any bona fide fringe benefits, bears a reasonable relationship to the wage rates contained in the wage determination"

    29 CFR 5.5(a)(1)(iii)(A). It "may not be used to split, subdivide, or otherwise avoid application of classifications listed in the wage determination" (5.5(a)(1)(iii)(B)).

    How does a conformance request (SF 1444) work?

    1. The contractor submits "Standard Form (SF) 1444, Request for Authorization of Additional Classification and Rate" to the contracting officer, with the proposed classification and rate including fringes (FAR 22.406-3(a)).
    2. The contracting officer checks the three criteria. If the contractor, the workers (if known) or their representatives, and the contracting officer agree, "a report of the action taken will be sent by the contracting officer by email to DBAconformance@dol.gov." If they don't, the contracting officer sends the question with everyone's views and a recommendation (29 CFR 5.5(a)(1)(iii)(C)–(D)).
    3. DOL "will approve, modify, or disapprove every additional classification action within 30 days of receipt," or say within 30 days that it needs more time.
    4. "The contractor must furnish a written copy of such determination to each affected worker or it must be posted as a part of the wage determination."
    5. The rate "must be paid to all workers performing work in the classification under this contract from the first day on which work is performed in the classification." Work done while the request is pending is paid at the approved rate, back to day one.

    When conformances for the same classification keep coming in, DOL can list it on the determination itself, for "a classification for which conformance requests are regularly submitted" (29 CFR 1.3(f)). And when "all or virtually all of the work on a contract will be performed by a classification that is not listed in the general wage determination that would otherwise apply," the agency can ask for a project wage determination before award instead (29 CFR 1.5(b)(1)(iii)).

    How are apprentices paid on Davis-Bacon jobs?

    "Apprentices will be permitted to work at less than the predetermined rate for the work they perform when they are employed pursuant to and individually registered in a bona fide apprenticeship program" registered with DOL's Office of Apprenticeship or a State Apprenticeship Agency it recognizes. A worker certified as eligible for probationary employment can be paid as an apprentice "in the first 90 days of probationary employment as an apprentice in such a program" (29 CFR 5.5(a)(4)(i)(A)).

    RuleWhat it says
    Not registeredAnyone on payroll at an apprentice rate who isn't registered or on certified probation "must be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed."
    RatioThe apprentice-to-journeyworker ratio can't exceed the program's. "Any apprentice performing work on the job site in excess of the ratio permitted under this section must be paid not less than the applicable wage rate" for the work.
    Working in another area"The ratios and wage rates (expressed in percentages of the journeyworker's hourly rate) applicable within the locality in which the construction is being performed must be observed." If the locality has none, the contractor's program applies.
    Fringe benefits"Apprentices must be paid fringe benefits in accordance with the provisions of the apprenticeship program," or the full fringe if the program doesn't say.
    Federal-aid highway traineesThe apprentice definition doesn't apply to trainees on 23 U.S.C. 113 projects in programs certified by the Secretary of Transportation (29 CFR 5.2).

    29 CFR 5.5(a)(4)(i)(A)–(D). On WH-347, column 2 takes "J" for a journeyworker or "RA" for a registered apprentice, and box 4 of the Statement of Compliance names each apprenticeship program (WH-347 instructions).

    What about helpers?

    A helper classification appears on a determination only where the helper's duties are "clearly defined and distinct from those of any other classification," using helpers is "an established prevailing practice in the area," and "the helper is not employed as a trainee in an informal training program" (29 CFR 5.2). Otherwise a helper is paid the rate for the work performed, or the contractor goes through conformance.

    Next steps

    Quick answers

    What is SF 1444?

    Standard Form 1444, Request for Authorization of Additional Classification and Rate. Under FAR 22.406-3 the contracting officer has the contractor submit it when a worker will be employed in a classification the contract's wage determination doesn't list.

    How long does a Davis-Bacon conformance take?

    DOL's Wage and Hour Division approves, modifies or disapproves the request within 30 days of receiving it, or tells the contracting officer within that time that it needs longer (29 CFR 5.5(a)(1)(iii)(C)).

    Can apprentices be paid less on Davis-Bacon jobs?

    Only apprentices individually registered in a program registered with DOL's Office of Apprenticeship or a recognized State Apprenticeship Agency, or in their first 90 days of certified probationary employment, and only within the program's ratio. Anyone else is paid the full rate for the work (29 CFR 5.5(a)(4)(i)).

    Create your free account

    Keep your jobs and rates together, on any device.

    No password. Rate alerts are optional.

    Already have an account?