Home / Alabama
Alabama prevailing wage rates (Davis-Bacon)
Pick a county to see every trade's rate there, or pick a trade to compare it across the state. All 3,762 rates come from the 165 Davis-Bacon wage determinations the U.S. Department of Labor publishes for Alabama on SAM.gov, for building, residential, highway and heavy construction.
Davis-Bacon is the only prevailing wage here (federally funded or assisted work). Alabama has no state prevailing wage law (DOL state table).
The Department of Labor modifies these determinations on SAM.gov in weekly batches through the year; the latest Alabama modification we hold is dated May 18, 2026. What changed in Alabama's determinations. A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)). Checked against sam.gov on October 25, 2026.
What is the prevailing wage rate in Alabama?
It depends on the trade. Taking each trade's main rate in each county, DOL's figures run from $7.25 an hour (landscape and irrigation laborer, Autauga County) to $58.13 (boilermaker, Autauga County). Each figure is the base wage plus fringe benefits. Pick a county or a trade below for the exact rate.
Prevailing wage rates by county
- Autauga19 trades
- Baldwin19 trades
- Barbour18 trades
- Bibb20 trades
- Blount20 trades
- Bullock18 trades
- Butler18 trades
- Calhoun18 trades
- Chambers17 trades
- Cherokee17 trades
- Chilton20 trades
- Choctaw17 trades
- Clarke17 trades
- Clay17 trades
- Cleburne17 trades
- Coffee18 trades
- Colbert20 trades
- Conecuh17 trades
- Coosa17 trades
- Covington18 trades
- Crenshaw18 trades
- Cullman17 trades
- Dale18 trades
- Dallas18 trades
- DeKalb17 trades
- Elmore19 trades
- Escambia18 trades
- Etowah18 trades
- Fayette17 trades
- Franklin17 trades
- Geneva22 trades
- Greene17 trades
- Hale19 trades
- Henry22 trades
- Houston21 trades
- Jackson17 trades
- Jefferson20 trades
- Lamar17 trades
- Lauderdale20 trades
- Lawrence21 trades
- Lee19 trades
- Limestone19 trades
- Lowndes19 trades
- Macon18 trades
- Madison19 trades
- Marengo17 trades
- Marion17 trades
- Marshall17 trades
- Mobile19 trades
- Monroe17 trades
- Montgomery18 trades
- Morgan21 trades
- Perry17 trades
- Pickens20 trades
- Pike18 trades
- Randolph17 trades
- Russell19 trades
- Shelby20 trades
- St. Clair20 trades
- Sumter18 trades
- Talladega17 trades
- Tallapoosa17 trades
- Tuscaloosa19 trades
- Walker20 trades
- Washington18 trades
- Wilcox18 trades
- Winston17 trades
Rates by trade
Each trade page maps that trade's main rate in every county. Carpenter rates, for example, range from $14.01 to $45.04 an hour.
- Boilermaker$58.13
- Brick Tender$11.00–$12.22
- Bricklayer$19.81–$22.00
- Carpenter$14.01–$45.04
- Carpet & Soft Floor Layer$8.01–$12.03
- Cement Mason$15.48–$23.30
- Drywall Finisher$9.00–$12.00
- Drywall Installer / Lather$8.13–$15.00
- Electrician$16.18–$49.58
- Glazier$17.71–$28.64
- Guardrail Installer$17.10–$17.59
- Insulator (Heat & Frost / Asbestos Worker)$47.50
- Ironworker$15.94–$47.78
- Laborer$10.00–$26.06
- Landscape & Irrigation Laborer$7.25–$8.57
- Operating Engineer$12.00–$46.62
- Painter$15.10–$21.61
- Plumber / Pipefitter$19.33–$52.05
- Refrigeration & A/C Mechanic$10.40–$22.62
- Roofer$7.25–$13.66
- Sheet Metal Worker$10.47–$50.99
- Striping & Traffic Control Worker$19.25–$20.94
- Teamster (Truck Driver)$12.50–$14.05
- Tile Setter$15.86–$20.00
How Davis-Bacon rates work in Alabama
- Which projects. Davis-Bacon and its Related Acts cover contractors and subcontractors "performing on federally funded or assisted contracts in excess of $2,000" for the construction, alteration or repair of public buildings or public works (DOL).
- Alabama's own law. Davis-Bacon is the only prevailing wage here (federally funded or assisted work). Alabama has no state prevailing wage law (DOL state table).
- Four kinds of construction. Each wage determination (WD) covers building, residential, highway or heavy construction, or a mix, in a set of counties (29 CFR 1.2, 1.5). Residential WDs cover single family homes and apartments up to and including four stories. A project uses the WD for its kind of work, and a mixed project can need more than one.
- Which rate applies. A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)).
- Base plus one fringe amount. Each classification has a base rate and one fringe figure. The contractor can pay the fringe into bona fide benefit plans or as cash, and can meet the total with any mix of wage and fringe (29 CFR 5.5(a)(1)). Our total is the base plus the fringe; DOL prints no total.
- Rate identifiers. Each rate carries an identifier. A union code such as ELEC0011-002 means DOL found the collectively bargained rate prevailing; SU marks a survey rate, UAVG a weighted union average, and SA a rate adopted from a state survey. The date after it is the date of that rate, not of the WD.
- Overtime. Davis-Bacon rates are straight time. On contracts over $100,000, the Contract Work Hours and Safety Standards Act requires 1½ times the basic rate for hours over 40 in a workweek (40 U.S.C. 3702). The fringe is owed for every hour at its straight-time amount.
- Classifications that aren't listed. If the work needs a classification the WD doesn't list, it can be added after award only through the contract's labor standards clauses (29 CFR 5.5(a)(1)(iii)), as each WD says.
- Payroll. Contractors and subcontractors submit certified payrolls every week to the contracting agency and keep the records for three years (29 CFR 5.5(a)(3)).
How we read DOL's data
We read every active Alabama Davis-Bacon wage determination from SAM.gov's own data and check every number with a second, independent read of the same file. DOL prints no total; ours is base plus fringe. How we check.
Download the data
All Alabama rates as CSV or JSON, plus one file per county on the data page.
Apprentice rates
Davis-Bacon determinations list journeyworker rates. Apprentices in a program registered with DOL or a recognized state agency can be paid the program's percentage of the rate, within its ratio; anyone else gets the full rate (29 CFR 5.5(a)(4)).
Alabama Davis-Bacon questions
Does Alabama have a prevailing wage law?
Davis-Bacon is the only prevailing wage here (federally funded or assisted work). Alabama has no state prevailing wage law (DOL state table).
How much is Davis-Bacon pay for an electrician in Alabama?
From $16.18 to $49.58 an hour for the main electrician classification, depending on the county; the median county is $27.98. See every county on one map.
How often do Davis-Bacon rates change in Alabama?
The Department of Labor modifies these determinations on SAM.gov in weekly batches through the year. In 2026 DOL published 167 modifications to 167 Alabama wage determinations that changed a rate, the latest on May 18, 2026. See each one.
Which wage determination applies to my project?
A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)).
Do apprentices get prevailing wage in Alabama?
Davis-Bacon determinations list journeyworker rates. Apprentices in a program registered with DOL or a recognized state agency can be paid the program's percentage of the rate, within its ratio; anyone else gets the full rate (29 CFR 5.5(a)(4)).