Home / Alabama / Dale County / Sheet Metal Worker
Dale County, AL · Sheet Metal Worker
Sheet Metal Worker prevailing wage in Dale County, Alabama
$30.94an hour, base wage + fringe benefits (our sum)
$20.00 base wage + $10.94 fringe benefits
SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) · SUAL2015-003
$10.47an hour, base wage + fringe benefits (our sum)
$10.47 base wage + $0.00 fringe benefits
SHEET METAL WORKER · SUAL2007-117
On federally funded or assisted building construction in Dale County, a sheet metal worker must be paid at least $30.94 an hour: a $20.00 base wage plus $10.94 in fringe benefits, under wage determination AL20260075 (modification 1). DOL prints no total, so $30.94 is our sum of the two.
Wage determination AL20260075, modification 1, published May 18, 2026, for building construction; rate identifier SUAL2015-003 (August 2, 2017). Checked against sam.gov on October 25, 2026.
On federally funded or assisted residential construction in Dale County, a sheet metal worker must be paid at least $10.47 an hour: a $10.47 base wage plus $0.00 in fringe benefits, under wage determination AL20260033 (modification 1). DOL prints no total, so $10.47 is our sum of the two.
Wage determination AL20260033, modification 1, published May 18, 2026, for residential construction; rate identifier SUAL2007-117 (October 23, 2007). Checked against sam.gov on October 25, 2026.
Davis-Bacon is the only prevailing wage here (federally funded or assisted work). Alabama has no state prevailing wage law (DOL state table).
DOL lists 2 sheet metal worker rates for Dale County, from $10.47 to $30.94 an hour. See all of them.
Base wage and fringe benefits: $20.00 + $10.94
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $20.00 |
| Fringe benefits (one figure, not itemized) | $10.94 |
| Base + fringe benefits (our sum; DOL prints no total) | $30.94 |
Base wage and fringe benefits: $10.47 + $0.00
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $10.47 |
| Base + fringe benefits (our sum; DOL prints no total) | $10.47 |
When does this rate change?
- A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)).
- DOL changes a WD by publishing a numbered modification on SAM.gov. This page reads the modification named in the Source line; the Alabama change log lists what each one changed.
Every sheet metal worker rate in Dale County
As DOL lists them. The highlighted row is the one this page leads with.
| Classification | Base wage | Fringe benefits | Total rate | WD |
|---|---|---|---|---|
| SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)BuildingSUAL2015-003 | $20.00 | $10.94 | $30.94 | AL20260075 Mod 1 |
| SHEET METAL WORKERResidentialSUAL2007-117 | $10.47 | $0.00 | $10.47 | AL20260033 Mod 1 |
How Dale County compares
The main sheet metal worker rate in every county that has one, and how the pay splits here and nearby. All bars use the same scale.
Every county in Alabama
Wage and fringe benefits, nearby
- Dale Countybase $20.00$30.94
- Coffee Countybase $20.00$30.94
- Henry Countybase $16.85$27.79
- Houston Countybase $16.85$27.79
Sheet Metal Worker rates in nearby counties
Current DOL rates. Davis-Bacon rates are set for groups of counties, so neighbours often share them; the county where the work is done decides.
| County | Classification | Base wage | Total rate | vs Dale County |
|---|---|---|---|---|
| Dale County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $20.00 | $30.94 | |
| Coffee County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $20.00 | $30.94 | same |
| Pike County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $20.00 | $30.94 | same |
| Barbour County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $20.00 | $30.94 | same |
| Henry County | SHEET METAL WORKER, INCLUDES HVAC DUCT INSTALLATION | $16.85 | $27.79 | −$3.15 |
| Houston County | SHEET METAL WORKER, INCLUDES HVAC DUCT INSTALLATION | $16.85 | $27.79 | −$3.15 |
| Geneva County | SHEET METAL WORKER, INCLUDES HVAC DUCT INSTALLATION | $16.85 | $27.79 | −$3.15 |
Alabama sheet metal worker prevailing wage by county, with a map
More from DOL on this rate
- DOL wage determination
- SAM.gov wage determinations
- Davis-Bacon determinations list journeyworker rates. Apprentices in a program registered with DOL or a recognized state agency can be paid the program's percentage of the rate, within its ratio; anyone else gets the full rate (29 CFR 5.5(a)(4)).
Are you being paid this rate?
Add your base pay to the fringe your employer pays for you, in cash or into plans, and compare the sum with the total. The Department of Labor's Wage and Hour Division takes complaints: 1-866-487-9243, or dol.gov/agencies/whd/contact/complaints.
Source
U.S. Department of Labor, Wage and Hour Division (DOL), wage determination AL20260075 Mod 1, published May 18, 2026: sam.gov/wage-determination/AL20260075/1
We read every active Alabama Davis-Bacon wage determination from SAM.gov's own data and check every number with a second, independent read of the same file. DOL prints no total; ours is base plus fringe. How we check · Download Dale County as CSV · Report an error