Home / California / Modoc County / Sheet Metal Worker
Modoc County · Sheet Metal Worker
Sheet Metal Worker prevailing wage in Modoc County, California
$107.01an hour, base wage + fringe benefits
$58.79 base wage + $48.22 fringe benefits
Modoc County uses the same sheet metal worker rates as 7 other counties. See all of them on one page.
On California public works in Modoc County, a sheet metal worker must be paid at least $107.01 an hour in total: $58.79 in wages plus $48.22 in employer payments to health, pension, training and other funds. Daily overtime is $139.24 and Sunday and holiday work is $171.45.
DIR general determination 166-162-1, issued August 22, 2026. Expires June 27, 2027. Checked against dir.ca.gov on October 24, 2026.
DIR lists 3 sheet metal worker rates for Modoc County, from $85.91 to $107.01 an hour. See all of them.
Base wage and fringe benefits: $58.79 + $48.22
The basic hourly rate is the taxable wage. The other lines, the fringe benefits DIR calls employer payments, are what DIR expects the employer to pay into health, pension and other plans for each hour worked. An employer can pay part of that as extra wages instead, as long as the total per hour stays at $107.01 or more.
| Basic hourly rate (taxable wage) (footnote A) | $58.79 |
| Health and welfare | $17.54 |
| Pension (footnote AZ) | $28.12 |
| Training | $1.56 |
| Other payments | $1.00 |
| Total straight-time hourly rate | $107.01 |
Vacation and holiday is $0.00 in DIR's table. Footnote F says where that money is counted.
Straight time covers an 8-hour day.
When does this rate change?
- A project pays the rates in effect on its bid advertisement date for the life of the job, plus any increase DIR set in advance (DIR FAQ).
- DIR issues new determinations on February 22 and August 22, and they take effect 10 days later. This rate is from determination 166-162-1, issued August 22, 2026; DIR's expiration date for it is June 27, 2027.
Scheduled increases
DIR has already set these increases. Work on or after each date is paid the higher rate. DIR often leaves part of an increase "to be allocated to wages and/or employer payments" and confirms the split when it comes due, and it can reduce a scheduled increase in a later notice, so check DIR's increase page before you pay it.
| Takes effect | Increase per hour | Total after increase |
|---|---|---|
| June 28, 2027 | +$4.50 | $111.51 |
| July 3, 2028 | +$5.00 | $116.51 |
| July 2, 2029 | +$5.25 | $121.76 |
| July 1, 2030 | +$5.50 | $127.26 |
The double asterisk after DIR's expiration date means the next rate is already set. If the work runs past that date you have to pay the new rate, and DIR says to build it into contracts signed now (DIR FAQ, Q8).
Rate history since 2024
Total hourly rate for this classification in each DIR release. The chart above draws the same figures with the increases that follow.
| Release | Total | Change |
|---|---|---|
| 2024-2 | $99.63 | |
| 2025-1 | $99.63 | no change |
| 2025-2 | $102.63 | +$3.00 |
| 2026-1 | $102.63 | no change |
| 2026-2 | $107.01 | +$4.38 |
Every sheet metal worker rate in Modoc County
As DIR lists them. The highlighted row is the one this page leads with.
- Sheet Metal Worker$107.01
- Metal Deck & Siding$94.70
- Mechanical Job Where Cost of Project Is $500,000 or Under$85.91
| Classification | Base wage | Fringe benefits | Total rate | Daily OT | Determination |
|---|---|---|---|---|---|
| Mechanical Job Where Cost of Project Is $500,000 or Under | $43.57 | $42.34 | $85.91 | $109.13 | 166-162-1 |
| Sheet Metal Worker: Metal Deck & Siding | $52.95 | $41.75 | $94.70 | $122.31 | 166-104-12 |
| Sheet Metal Worker | $58.79 | $48.22 | $107.01 | $139.24 | 166-162-1 |
Davis-Bacon sheet metal worker rate in Modoc County
Federally funded or assisted construction here uses the U.S. Department of Labor's wage determinations. When a California awarding body runs a federally funded or assisted project, DIR's rates must be paid where they are higher than the Davis-Bacon rates (DIR public works FAQ).
We don't put a federal figure next to DIR's here, because the federal determination for this county has no matching classification. The federal rows for this trade are below; match the classification to the work.
| Construction | Federal classification | Base wage | Total rate | WD |
|---|---|---|---|---|
| Building, Highway, Heavy | SHEET METAL WORKER: ALL OTHER WORK (MARIN, NAPA, SOLANO SONOMA & TRINITY COUNTIES)SHEE0104-006 | $86.31 | $133.06 | CA20260007 Mod 5 |
| Building, Highway, Heavy | SHEET METAL WORKER: MECHANICAL JOBS $200,000 & UNDER (BUTTE, GLENN, LASSEN, MODOC, PLUMAS, SHASTA, SIERRA, SISKIYOU, AND TEHAMA COUNTIES)SHEE0104-019 | $72.71 | $111.63 | CA20260007 Mod 5 |
| Building, Highway, Heavy | SHEET METAL WORKER: MECHANICAL JOBS OVER $200,000 (BUTTE, GLENN, LASSEN, MODOC, PLUMAS, SHASTA, SIERRA, SISKIYOU, AND TEHAMA COUNTIES)SHEE0104-019 | $59.82 | $101.34 | CA20260007 Mod 5 |
| Residential | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)SUCA2013-004 | $22.79 | $32.42 | CA20260030 Mod 1 |
Davis-Bacon rates from SAM.gov, read October 25, 2026. Our federal totals are base plus fringe; DOL prints no total. California Davis-Bacon changes
How Modoc County compares
The main sheet metal worker rate in every county that has one, and how the pay splits here and in the nearest counties. All bars use the same scale.
Every county in California
Base wage and fringe benefits, nearby
- Modoc Countybase $58.79$107.01
- Lassen Countybase $58.79$107.01
- Shasta Countybase $58.79$107.01
- Trinity Countybase $81.34$140.34
Sheet Metal Worker rates in nearby counties
Current DIR rates. You pay the rate for the county where the work is done, even if your shop is somewhere else.
DIR's sheet metal worker rates for Modoc County are the same as in 7 other counties: Glenn, Lassen, Plumas, Shasta, Sierra, Siskiyou, Tehama. The closest county with a different rate is Trinity County, at $140.34.
| County | Classification | Base wage | Total rate | vs Modoc County |
|---|---|---|---|---|
| Modoc County | Sheet Metal Worker | $58.79 | $107.01 | |
| Lassen County | Sheet Metal Worker | $58.79 | $107.01 | same |
| Shasta County | Sheet Metal Worker | $58.79 | $107.01 | same |
| Siskiyou County | Sheet Metal Worker | $58.79 | $107.01 | same |
| Plumas County | Sheet Metal Worker | $58.79 | $107.01 | same |
| Tehama County | Sheet Metal Worker | $58.79 | $107.01 | same |
| Sierra County | Sheet Metal Worker | $58.79 | $107.01 | same |
California sheet metal worker prevailing wage by county, with a map
Footnotes on this rate
DIR's footnotes, in DIR's words. Several change the rate itself: zone pay, a percentage added to the total, or which overtime hours get which rate.
- A Includes amount withheld for dues check off.
- AZ Includes an amount for pension which is factored at the applicable overtime multiplier. Pursuant to Labor Code sections 1773.1 and 1773.8, the amount paid for this employer payment may vary resulting in a lower taxable basic hourly wage rate, but the total hourly rates for straight time and overtime may not be less than the general prevailing rate of per diem wages.
- F Included in straight-time hourly rate.
- E Rate applies to the first 2 daily overtime hours and the first 10 hours on Saturday; all other time is paid at the Sunday and holiday overtime hourly rate.
DIR's other marks: # means an apprenticeable craft, * means in effect until superseded, ** means the next rate is already set.
More from DIR on this rate
- Holidays (DIR PDF)
- Scope of work: which tasks this rate covers
- Travel and subsistence
- Apprentice rates: DIR publishes these separately, by program. Look them up on DIR.
Are you being paid this rate?
Add your hourly wage to what your employer pays into health, pension and other plans for you, and compare it with $107.01. Plan payments only count if the money goes into the plan; your pay stub won't show them, but plan statements will. The training amount goes to the California Apprenticeship Council or an apprenticeship program, not to you. Check a week of pay.
Contractors on most public works jobs file certified payroll with the state, and anyone can look it up in DIR's CPR public search. If your total comes up short, you can file a public works complaint with the California Labor Commissioner.
Source
California Department of Industrial Relations, general prevailing wage determination 166-162-1: www.dir.ca.gov/oprl/2026-2/PWD/Determinations/Subtrades/MOD.html
Each figure is copied from DIR's file and checked by a second, separate reader. How we check · How to read a determination · Download Modoc County as CSV · Report an error