Home / California / San Benito County / Sheet Metal Worker
San Benito County · Sheet Metal Worker
Sheet Metal Worker prevailing wage in San Benito County, California
$94.70an hour, total · Metal Deck & Siding
$52.95 wage + $41.75 employer payments
San Benito County uses the same sheet metal worker rates as 1 other county. See all of them on one page.
On California public works in San Benito County, a sheet metal worker working as metal deck & siding must be paid at least $94.70 an hour in total: $52.95 in wages plus $41.75 in employer payments to health, pension, training and other funds. Daily overtime is $122.31 and Sunday and holiday work is $149.91.
DIR general determination 166-104-12, issued August 22, 2025 and still current in DIR's 2026-2 release. Checked against dir.ca.gov on October 24, 2026.
DIR lists 3 sheet metal worker rates for San Benito County, from $94.70 to $108.84 an hour. See all of them.
DIR's expiration date for this determination was June 30, 2026. DIR hasn't issued a replacement, so this rate still applies, which is what the single asterisk on DIR's table means. A project keeps the rates in effect on its bid advertisement date for the life of the job.
Base wage and fringe: $52.95 + $41.75
The basic hourly rate is the taxable wage. The other lines, usually called fringe benefits, are what DIR expects the employer to pay into health, pension and other plans for each hour worked. An employer can pay part of that as extra wages instead, as long as the total per hour stays at $94.70 or more.
| Basic hourly rate (taxable wage) (footnote I) | $52.95 |
| Health and welfare (footnote AQ) | $17.65 |
| Pension (footnote BI) | $23.78 |
| Training (footnote BJ) | $0.32 |
| Total straight-time hourly rate | $94.70 |
Vacation and holiday is $0.00 in DIR's table. Footnote F says where that money is counted.
Straight time covers an 8-hour day.
Davis-Bacon sheet metal worker rate in San Benito County
Federally funded or assisted construction here uses the U.S. Department of Labor's wage determinations. When a California awarding body runs a federally funded or assisted project, DIR's rates must be paid where they are higher than the Davis-Bacon rates (DIR public works FAQ).
We don't put a federal figure next to DIR's here, because this page leads with a classification the federal determinations don't list one to one. The federal rows for this trade are below; match the classification to the work.
| Construction | Federal classification | Base + fringe | Base | WD |
|---|---|---|---|---|
| Building, Highway, Heavy | SHEET METAL WORKER (MONTEREY & SAN BENITO COUNTIES)SHEE0104-001 | $97.19 | $58.52 | CA20260018 Mod 8 |
| Building, Highway, Heavy | SHEET METAL WORKER: ALL OTHER WORK (ALAMEDA, CONTRA COSTA, SAN FRANSICO, SAN MATEO, SANTA CLARA COUNTIES))SHEE0104-001 | $110.89 | $64.06 | CA20260018 Mod 8 |
| Residential | SHEET METAL WORKER: (AREA 2) AREA 2: MONTEREY & SAN BENITOSHEE0104-002 | $102.48 | $65.02 | CA20260019 Mod 6 |
| Residential | SHEET METAL WORKER: (AREA 3) AREA 3: SANTA CRUZSHEE0104-002 | $103.11 | $66.18 | CA20260019 Mod 6 |
Davis-Bacon rates from SAM.gov, read October 25, 2026. Our federal totals are base plus fringe; DOL prints no total. California Davis-Bacon changes
Rate history since 2024
Total hourly rate for this classification in each DIR release.
| Release | Total | Change |
|---|---|---|
| 2024-2 | $91.50 | |
| 2025-1 | $91.50 | no change |
| 2025-2 | $94.70 | +$3.20 |
| 2026-1 | $94.70 | no change |
| 2026-2 | $94.70 | no change |
Every sheet metal worker rate in San Benito County
As DIR lists them. The highlighted row is the one this page leads with.
- For Service and Repair$108.84
- Zone 1 (Under 20 Miles)$108.84
- Metal Deck & Siding$94.70
| Classification | Total | Base | Employer payments | Daily OT | Determination |
|---|---|---|---|---|---|
| Sheet Metal Worker: For Service and Repair | $108.84 | $65.24 | $43.60 | $143.71 | 166-104-10 |
| Metal Deck & Siding | $94.70 | $52.95 | $41.75 | $122.31 | 166-104-12 |
| Sheet Metal Worker: Zone 1 (Under 20 Miles) | $108.84 | $65.24 | $43.60 | $143.71 | 166-104-10 |
How San Benito County compares
The main sheet metal worker rate in every county that has one, and how the pay splits here and in the nearest counties. All bars use the same scale.
Every county in California
Wage and employer payments, nearby
- San Benito Countybase $52.95$94.70
- Monterey Countybase $52.95$94.70
- Merced Countybase $50.52$104.75
- Santa Clara Countybase $81.34$140.34
Sheet Metal Worker rates in nearby counties
Current DIR rates. You pay the rate for the county where the work is done, even if your shop is somewhere else.
DIR's sheet metal worker rates for San Benito County are the same as in 1 other county: Monterey.
| County | Classification | Total | Base | vs San Benito County |
|---|---|---|---|---|
| Santa Clara County | Sheet Metal Worker | $140.34 | $81.34 | +$45.64 |
| Santa Cruz County | Sheet Metal Worker | $108.84 | $66.40 | +$14.14 |
| Merced County | Sheet Metal Worker | $104.75 | $50.52 | +$10.05 |
| Stanislaus County | Sheet Metal Worker | $104.75 | $50.52 | +$10.05 |
| Fresno County | Sheet Metal Worker | $102.42 | $47.93 | +$7.72 |
| San Benito County | Metal Deck & Siding | $94.70 | $52.95 | |
| Monterey County | Metal Deck & Siding | $94.70 | $52.95 | same |
California sheet metal worker prevailing wage by county, with a map
Footnotes on this rate
DIR's footnotes, in DIR's words. Several change the rate itself: zone pay, a percentage added to the total, or which overtime hours get which rate.
- I Includes amount for vac/hol and dues check off.
- AQ Pursuant to Labor Code sections 1773.1 and 1773.8, the amount paid for this employer payment may vary resulting in a lower taxable basic hourly wage rate, but the total hourly rates for straight time and overtime may not be less than the general prevailing rate of per diem wages.
- BI Includes an amount for pension factored at the overtime multiplier rate.
- F Included in straight-time hourly rate.
- BJ Includes $0.05 for scholar fund.
- BE Rate applies to the first 2 daily overtime hours and the first 8 hours on Saturday only; all other time is paid at the Sunday and holiday overtime hourly rate.
DIR's other marks: # means an apprenticeable craft, * means in effect until superseded, ** means the next rate is already set.
More from DIR on this rate
- Holidays (DIR PDF)
- Scope of work: which tasks this rate covers
- Travel and subsistence
- Apprentice rates: DIR publishes these separately, by program. Look them up on DIR.
Are you being paid this rate?
Add your hourly wage to what your employer pays into health, pension and other plans for you, and compare it with $94.70. Plan payments only count if the money goes into the plan; your pay stub won't show them, but plan statements will. The training amount goes to the California Apprenticeship Council or an apprenticeship program, not to you. Check a week of pay.
Contractors on most public works jobs file certified payroll with the state, and anyone can look it up in DIR's CPR public search. If your total comes up short, you can file a public works complaint with the California Labor Commissioner.
Source
California Department of Industrial Relations, general prevailing wage determination 166-104-12: www.dir.ca.gov/oprl/2026-2/PWD/Determinations/Subtrades/SBE.html
Each figure is copied from DIR's file and checked by a second, separate reader. How we check · How to read a determination · Download San Benito County as CSV · Report an error