Home / North Dakota / Sheet Metal Worker / McHenry County group
North Dakota · Sheet Metal Worker · 4 counties
Sheet Metal Worker prevailing wage, McHenry County group, North Dakota (4 counties)
DOL sets the same sheet metal worker rates, row for row, in 4 counties: Burke, McHenry, Pierce and Sheridan. Every figure on this page applies in each of them.
$57.01an hour, base wage + fringe benefits (our sum)
$34.34 base wage + $22.67 fringe benefits
SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) · SHEE9010-002
$18.06an hour, base wage + fringe benefits (our sum)
$14.72 base wage + $3.34 fringe benefits
SHEET METAL (SHEET METAL WORKER (HVAC DUCT ONLY)) · SUND2000-009
On federally funded or assisted building construction in each of these 4 counties, a sheet metal worker must be paid at least $57.01 an hour: a $34.34 base wage plus $22.67 in fringe benefits, under wage determination ND20260035 (modification 2). DOL prints no total, so $57.01 is our sum of the two.
Wage determination ND20260035, modification 2, published May 18, 2026, for building construction; rate identifier SHEE9010-002 (June 2, 2025). Checked against sam.gov on October 25, 2026.
On federally funded or assisted residential construction in each of these 4 counties, a sheet metal worker must be paid at least $18.06 an hour: a $14.72 base wage plus $3.34 in fringe benefits, under wage determination ND20260005 (modification 1). DOL prints no total, so $18.06 is our sum of the two.
Wage determination ND20260005, modification 1, published May 18, 2026, for residential construction; rate identifier SUND2000-009 (February 10, 2000). Checked against sam.gov on October 25, 2026.
Davis-Bacon is the only prevailing wage here (federally funded or assisted work). North Dakota has no state prevailing wage law (DOL state table).
DOL lists 3 sheet metal worker rates for each of these counties, from $18.06 to $57.01 an hour. See all of them.
Base wage and fringe benefits: $34.34 + $22.67
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $34.34 |
| Fringe benefits (one figure, not itemized) | $22.67 |
| Base + fringe benefits (our sum; DOL prints no total) | $57.01 |
Base wage and fringe benefits: $14.72 + $3.34
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $14.72 |
| Fringe benefits (one figure, not itemized) | $3.34 |
| Base + fringe benefits (our sum; DOL prints no total) | $18.06 |
When does this rate change?
- A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)).
- DOL changes a WD by publishing a numbered modification on SAM.gov. This page reads the modification named in the Source line; the North Dakota change log lists what each one changed.
Every sheet metal worker rate in the McHenry County group
As DOL lists them. The highlighted row is the one this page leads with.
- SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)Building · SHEE9010-002$57.01
- SHEET METAL (SHEET METAL WORKER (EXCLUDING HVAC))Residential · SUND2000-009$19.11
- SHEET METAL (SHEET METAL WORKER (HVAC DUCT ONLY))Residential · SUND2000-009$18.06
| Classification | Base wage | Fringe benefits | Total rate | WD |
|---|---|---|---|---|
| SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)BuildingSHEE9010-002 | $34.34 | $22.67 | $57.01 | ND20260035 Mod 2 |
| SHEET METAL (SHEET METAL WORKER (HVAC DUCT ONLY))ResidentialSUND2000-009 | $14.72 | $3.34 | $18.06 | ND20260005 Mod 1 |
| SHEET METAL (SHEET METAL WORKER (EXCLUDING HVAC))ResidentialSUND2000-009 | $16.87 | $2.24 | $19.11 | ND20260005 Mod 1 |
How the McHenry County group compares
The main sheet metal worker rate in every county that has one, and how the pay splits here and nearby. All bars use the same scale.
Every county in North Dakota
Wage and fringe benefits, nearby
- McHenry County groupbase $34.34$57.01
- Pierce Countybase $34.34$57.01
- Bottineau Countybase $34.34$57.01
- Rolette Countybase $26.80$35.32
Which county is in which sheet metal worker group
Every North Dakota county with a sheet metal worker rate. Counties DOL treats alike share one page; the rest have their own.
| Counties | Main classification | Base wage | Total rate |
|---|---|---|---|
| Burleigh County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $33.64 | $57.24 |
| McKenzie County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $33.64 | $57.24 |
| Morton County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $33.64 | $57.24 |
| Oliver County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $33.64 | $57.24 |
| McHenry County group, 4 localities: Burke, McHenry, Pierce, Sheridan | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Bottineau County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Cass County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Grand Forks County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| McLean County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Mercer County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Renville County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Sioux County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Ward County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $34.34 | $57.01 |
| Stark County group, 7 localities: Bowman, Divide, Dunn, Golden Valley, Hettinger, Slope, Stark | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $29.88 | $49.55 |
| Adams County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $29.88 | $49.55 |
| Billings County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $29.88 | $49.55 |
| Williams County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $29.88 | $49.55 |
| Walsh County group, 15 localities: Benson, Cavalier, Eddy, Foster, Griggs, Kidder, LaMoure, Logan, McIntosh, Nelson, Steele, Towner, Traill, Walsh, Wells | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Richland County group, 6 localities: Dickey, Emmons, Grant, Ransom, Richland, Sargent | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Barnes County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Pembina County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Ramsey County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Rolette County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Stutsman County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $26.80 | $35.32 |
| Mountrail County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $24.05 | $33.53 |
4 groups of counties with identical DOL rates, and 21 counties with rates of their own.
North Dakota sheet metal worker prevailing wage by county, with a map
More from DOL on this rate
- SAM.gov wage determinations
- Davis-Bacon determinations list journeyworker rates. Apprentices in a program registered with DOL or a recognized state agency can be paid the program's percentage of the rate, within its ratio; anyone else gets the full rate (29 CFR 5.5(a)(4)).
Every trade's rates, county by county: Burke · McHenry · Pierce · Sheridan
Are you being paid this rate?
Add your base pay to the fringe your employer pays for you, in cash or into plans, and compare the sum with the total. The Department of Labor's Wage and Hour Division takes complaints: 1-866-487-9243, or dol.gov/agencies/whd/contact/complaints.
Source
U.S. Department of Labor, Wage and Hour Division (DOL), Davis-Bacon wage determinations on SAM.gov, as of October 25, 2026. For the row this page leads with:
- Burke: ND20260035 Mod 2
- McHenry: ND20260035 Mod 2
- Pierce: ND20260035 Mod 2
- Sheridan: ND20260035 Mod 2
We read every active North Dakota Davis-Bacon wage determination from SAM.gov's own data and check every number with a second, independent read of the same file. DOL prints no total; ours is base plus fringe. How we check · Download every North Dakota rate as CSV · Report an error