Home / New York / Operating Engineer / Orange County group
New York · Operating Engineer · 5 counties
Operating Engineer prevailing wage, Orange County group, New York (5 counties)
NYSDOL sets the same operating engineer rates, row for row, in 5 counties: Delaware, Orange, Rockland, Sullivan and Ulster. Every figure on this page applies in each of them.
$105.47an hour, wage + supplements
$68.72 wage + $36.75 supplements
On New York public works in each of these 5 counties, an operating engineer must be paid at least $105.47 an hour: a $68.72 base wage plus $36.75 in supplements. NYSDOL prints no total, so $105.47 is our sum of the two.
2026-27 schedules, with the October 1, 2026 updates; this rate, effective October 1, 2026. New York doesn't lock rates at bid: contractors pay the current prevailing rate, including the dated steps in the schedule, and monthly corrections retroactive to July 1 (NYSDOL). Checked against dol.ny.gov on October 25, 2026.
NYSDOL lists 33 operating engineer rates for each of these counties, from $96.05 to $113.99 an hour. See all of them.
NYSDOL's posted schedules are informational. An original schedule must be requested for each project (PRC number).
Base wage and supplements: $68.72 + $36.75
The base wage is the taxable hourly wage. NYSDOL prints the supplements as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $68.72 |
| Fringe benefits (one figure, not itemized) | $36.75 |
| Base + supplements (our sum; NYSDOL prints no total) | $105.47 |
Davis-Bacon operating engineer rates in these counties
The counties share NYSDOL's rates, but not always the same federal wage determination. When a contract requires both the state rate and the Davis-Bacon rate, paying the higher of the two meets both. The contract documents say which apply.
| County | Federal classification | Base + fringe | WD | vs NYSDOL |
|---|---|---|---|---|
| Delaware County | Federal rates listed on the county page; no one-to-one match | |||
| Orange County | Federal rates listed on the county page; no one-to-one match | |||
| Rockland County | Federal rates listed on the county page; no one-to-one match | |||
| Sullivan County | Federal rates listed on the county page; no one-to-one match | |||
| Ulster County | Federal rates listed on the county page; no one-to-one match | |||
Dated rates for this classification
NYSDOL prints more than one dated line for Operating Engineer - Building / Heavy&Highway: Class A. The one in force on October 25, 2026 leads this page; scheduled lines take effect on their date.
| Effective | Rate | Status |
|---|---|---|
| Jul 1, 2026 | Wage $63.22 | In force |
| Oct 1, 2026 | Wage $63.22 | In force |
When this rate changes
- New York rates aren't locked at bid. Each rate stays until its next printed effective date or the new annual determination on July 1, and contractors must pay the current rate (Article 8 schedules).
- NYSDOL posts error corrections and updates on the first business day of each month, and contractors pay them "retroactive to July 1" (NYSDOL). This page uses the 2026-27 schedules with the October 1, 2026 updates.
Every operating engineer rate in the Orange County group
As NYSDOL lists them. The highlighted row is the one this page leads with.
| Classification | Wage + supplements | Base | Supplements | Effective |
|---|---|---|---|---|
| Operating Engineer - Building / Heavy&Highway: Class A5 | $112.00 | $75.25 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class A4 | $110.97 | $74.22 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class A3 | $110.00 | $73.25 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class A2 | $107.47 | $70.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class A1 | $106.47 | $69.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class A | $105.47 | $68.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class B | $103.88 | $67.13 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class C | $101.97 | $65.22 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class D | $100.34 | $63.59 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Class E | $96.63 | $59.88 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Safety Engineer | $106.21 | $69.46 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Pilot/Engineer (Helicopter) | $107.29 | $70.54 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Co Pilot (Helicopter) | $105.47 | $68.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Communications Engineer (Helicopter) | $105.47 | $68.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Chief of Party (Surveying) | $105.47 | $68.72 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Transit/Instrument Man (Surveying) | $96.63 | $59.88 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Building / Heavy&Highway: Rod/Chainman (Surveying) | $96.05 | $59.30 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors (unlabelled row) wage is not a dollar amount (no rate); no total | — | — | $36.75 | — |
| Operating Engineer - Steel Erectors: Class A3 | $113.99 | $77.24 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class A2 | $112.33 | $75.58 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class A1 | $109.99 | $73.24 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class A | $107.83 | $71.08 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class B | $105.04 | $68.29 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class C | $102.38 | $65.63 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class D | $100.85 | $64.10 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Class E | $97.09 | $60.34 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Vacuum Truck | $105.80 | $69.05 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Safety Engineer | $106.66 | $69.91 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Pilot/Engineer (Helicopter) | $109.49 | $72.74 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Co Pilot (Helicopter) | $109.10 | $72.35 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Communications Engineer (Helicopter) | $109.10 | $72.35 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Chief of Party (Surveying) | $105.80 | $69.05 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Transit/Instrument man (Surveying) | $97.09 | $60.34 | $36.75 | Oct 1, 2026 |
| Operating Engineer - Steel Erectors: Rod/Chainman (Surveying) | $106.05 | $69.30 | $36.75 | Oct 1, 2026 |
How the Orange County group compares
The main operating engineer rate in every county that has one, and how the pay splits here and nearby. All bars use the same scale.
Every county in New York
Wage and supplements, nearby
- Orange County groupbase $68.72$105.47
- Rockland Countybase $68.72$105.47
- Putnam Countybase $62.20$96.62
- Sullivan Countybase $68.72$105.47
Which county is in which operating engineer group
Every New York county with a operating engineer rate. Counties NYSDOL treats alike share one page; the rest have their own.
| Counties and New York City | Main classification | Wage + supplements | Base |
|---|---|---|---|
| New York City | Engineer - Heavy Construction Operating Engineer I | $131.26 | $79.50 |
| Kings County group, 5 localities: Bronx, Kings, New York, Queens, Richmond | Operating Engineer - Building, Maintenance, Steel Erection & Heavy Construction: Group 1 | $122.77 | $83.44 |
| Orange County group, 5 localities: Delaware, Orange, Rockland, Sullivan, Ulster | Operating Engineer - Building / Heavy&Highway: Class A | $105.47 | $68.72 |
| Westchester County group, 2 localities: Putnam, Westchester | Operating Engineer - Building: GROUP I-A | $96.62 | $62.20 |
| Dutchess County* | Operating Engineer - Building: GROUP I-A | $96.62 | $62.20 |
| Albany County group, 17 localities: Albany, Clinton, Columbia, Essex, Franklin, Fulton, Greene, Hamilton, Herkimer, Montgomery, Otsego, Rensselaer, Saratoga, Schenectady, Schoharie, Warren, Washington | Operating Engineer - Building: Class A (CLASS C) | $92.16 | $57.78 |
| Erie County group, 4 localities: Chautauqua, Erie, Niagara, Orleans | Operating Engineer - Building: Class A | $89.92 | $52.53 |
| Cattaraugus County group, 2 localities: Cattaraugus, Wyoming | Operating Engineer - Building: Class A | $89.92 | $52.53 |
| Genesee County* | Operating Engineer - Building: Class A | $89.92 | $52.53 |
| Chenango County group, 3 localities: Broome, Chenango, Tioga | Operating Engineer - Building: Class A (CLASS C) | $87.31 | $53.01 |
| Onondaga County group, 11 localities: Cayuga, Cortland, Jefferson, Lewis, Madison, Oneida, Onondaga, Oswego, Seneca, St. Lawrence, Tompkins | Operating Engineer - Building: Class A | $84.24 | $51.21 |
| Monroe County group, 9 localities: Allegany, Chemung, Livingston, Monroe, Ontario, Schuyler, Steuben, Wayne, Yates | Operating Engineer - Building: CLASS A | $82.75 | $46.24 |
| Suffolk County group, 2 localities: Nassau, Suffolk | Operating Engineer - Building / Heavy&Highway: Well Driller | $50.19 | $45.63 |
10 groups of counties with identical NYSDOL rates, and 3 counties with rates of their own. * Part of the county has a rate of its own; its page lists each part's rate.
New York operating engineer prevailing wage by county, with a map
Notes on this rate
NYSDOL's notes, in NYSDOL's words.
- CLASS A5: Cranes, Derricks and Pile Drivers 100 tons or more and Tower Cranes, with 140ft boom and over.
- CLASS A4: Cranes, Derricks and Pile Drivers 100 tons or more and Tower Cranes, with 100ft to 139ft boom.
- CLASS A3: Cranes, Derricks and Pile Drivers 100 tons or more and Tower Cranes with a boom under 100ft.
- CLASS A2: Cranes, Derricks and Pile Drivers less than 100 tons with 140ft boom and over.
- CLASS A1: Cranes, Derricks and Pile Drivers less than 100 tons with a 100ft to 139ft boom.
- CLASS A: Bridge Deck Groover; Cranes, Derricks and Pile Drivers less than 100 tons with a boom under 100ft.; Autograde Combination Subgrader, Base Material Spreader and Base Trimmer (CMI and Similar Types); Autograde Pavement profiler (CMI and Similar Types); Autograde Pavement Profiler and Recycle type (CMI and Similar Type); Autograde Placer-Trimmer-Spreader Comb. (CMI & Similar types); Autograde Slipform Paver (CMI & Similar Types); Central Power Plants (all types); Chief of Party; Concrete Paving Machines; Drill (Bauer, AMI and Similar Types); Drillmaster, Quarrymaster (Down the Hole Drill), Rotary Drill, Self-Propelled Hydraulic Drill, Self-Powered Drill; Draglines; Elevator Graders; Excavator; Front End Loaders (5 yds. and over); Gradall's; Graders; Helicopters (Co-Pilot); Helicopters (Communications Engineer);Juntann Pile Driver; Locomotive (Large);Magni (Winch); Mucking Machines; Pavement & Concrete Breaker, i.e., Superhammer & Hoe Ram; Roadway Surface Grinder; Prentice Truck; Scooper (Loader and Shovel); Shovels; Tree Chopper with Boom; Trench Machines (Cable Plow); Tunnel Boring Machine; Vacuum Truck
- CLASS B: "A" Frame; Backhoe (Combination); Boom Attachment on Loaders (Rate based on size of Bucket) not applicable to Pipehook; Boring and Drilling Machines; Brush Chopper, Shredder and Tree Shredder, Tree Shearer; Bulldozer(Fine Grade); Cableways; Carryalls; Concrete Pump; Concrete Pumping System, Pump Concrete and Similar Types; Conveyors (125 ft. and over); Drill Doctor (duties incl. Dust Collector Maintenance); Front End Loaders (2 yds. but less than 5 yds.); Groove Cutting Machine (Ride on Type); Heater Planer; Hoists (all type Hoists, shall also include Steam, Gas, Diesel, Electric, Air Hydraulic, Single and Double Drum, Concrete, Brick Shaft Caisson, Snorkel Roof, and/or any other Similar Type Hoisting Machines, portable or stationary, except Chicago Boom Type); Long Boom Rate to be applied if Hoist is "Outside Material Tower Hoist"***; Hydraulic Cranes-10 tons and under; Hydraulic Dredge; Hydro-Axe; Hydro Blaster; Jacks-Screw Air Hydraulic Power Operated Unit or Console Type (not hand Jack or Pile Load Test Type); Log Skidder; Pans; Pavers (all) concrete; Plate and Frame Filter Press; Pumpcrete Machines, Squeezecrete & Concrete Pumping (regardless of size); Scrapers; Side Booms; "Straddle"Carrier-Ross and similar types; Winch Trucks (Hoisting); Whip Hammer
- CLASS C: Asphalt Curbing Machine; Asphalt Plant Engineer; Asphalt Spreader; Autograde Tube Finisher and Texturing Machine (CMI & Similar types); Autograde Curecrete Machine (CMI & Similar Types); Autograde Curb Trimmer & Sidewalk, Shoulder, Slipform (CMI & Similar Types); Bar Bending Machines (Power); Barrier Moving Machine-Zipper; Batchers, Batching Plant and Crusher on Site; Belt Conveyor Systems; Boom Type Skimmer Machines; Bridge Deck Finisher; Bulldozer(except fine grade); Car Dumpers (Railroad); Compressor and Blower Type Units (used independently or mounted on dual purpose Trucks, on Job Site or in conjunction with jobsite, in Loading and Unloading of Concrete, Cement, Fly Ash, Instantcrete, or Similar Type Materials); Compressors (2 or 3 in Battery); Concrete Finishing Machines; Concrete cleaning decontamination machine operator; Concrete Saws and Cutters (Ride-on type); Concrete Spreaders (Hetzel, Rexomatic and Similar Types); Concrete Vibrators; Conveyors (under 125 feet); Crushing Machines; Directional Boring Machines; Ditching Machine-small (Ditch-witch, Vermeer, or Similar type); Dope Pots (Mechanical with or without pump); Dumpsters; Elevator; Fireman; Fork Lifts (Economobile, Lull and Similar Types of Equipment); Front End Loaders (1 yd. and over but under 2 yds.); Generators (2 or 3 in Battery); Giraffe Grinders; Grout Pump; Gunnite Machines (excluding nozzle); Hammer Vibrator (in conjunction with Generator); Heavy Equipment Robotics Operator Technician; Hoists-Roof, Tugger, Aerial Platform Hoist & House Cars; Hoppers; Hopper Doors (power operated); Hydro Blaster; Hydraulic Jacking Trailer; Ladders (motorized); Laddervator; Locomotive-dinky type; Magni (Forks); Maintenance -Utility Man; Master Environmental Maintenance Technician; Mechanics; Mixers (Excepting Paving Mixers); Motor Patrols; Pavement Breakers (small self- propelled ride on type-also maintains compressor hydraulic unit); Pavement Breaker-truck mounted; Pipe Bending Machine (Power); Pitch Pump; Plaster Pump (regardless of size); Post Hole Digger (Post Pounder & Auger); Pot Hole Killer Trucks or equivalent; Rod Bending Machines (Power); Roller-Black Top; Scales (Power); Seaman pulverizing mixer; Shoulder widener; Silos; Skidsteer (all attachments); Skimmer Machines (boom-type); Steel Cutting Machine (service & maintain); Tam Rock Drill; Tractors; Transfer Machine; Captain (Power Boats); Tug Master (powerboats); Ultra High Pressure Waterjet Cutting Tool System operator/maintenance technician; Vacuum Blasting Machine; Vibrating Plants (used in conjunction with unloading); Welder and Repair Mechanics
- CLASS D: Brooms and Sweepers; Chippers; Compressor (single); Concrete Spreaders (small type); Conveyor Loaders (not including Elevator Graders); Engines-large diesel (1620 HP) and Staging Pump; Farm Tractors; Fertilizing Equipment (Operation & Maintenance of); Fine Grade Machine (small type); Form Line Graders (small type); Front End Loader (under 1 yard); Generator (single); Grease, Gas, Fuel and Oil supply trucks; Heaters (Nelson or other type incl. Propane, Natural Gas or Flow type Units); Lights, Portable Generating Light Plants; Mixers (Concrete, small); Mulching Equipment (Operation and Maintenance of); Pumps (2 or less than 4 inch suction); Pumps (4 inch suction and over incl. submersible pumps); Pumps (Diesel Engine and Hydraulic-immaterial of power); Road Finishing Machines (small type); Rollers-grade, fill or stone base; Seeding Equip. (Operation and Maintenance of); Sprinkler & Water Pump Trucks (used on jobsite or in conjunction with jobsite); Steam Jennies and Boilers-irrespective of use; Stone Spreader; Tamping Machines, Vibrating Ride-on; Temporary Heating Plant (Nelson or other type, incl. Propane, Natural Gas or Flow Type Units); Welding Machines (Gas, Diesel, and/or Electric Converters of any type, single, two, or three in a battery); Wellpoint Systems (including installation by Bull Gang and Maintenance of)
- CLASS E: Assistant Engineer/Oiler; Drillers Helper; Maintenance Apprentice (Deck Hand); Maintenance Apprentice (Oiler); Mechanics' Helper; Tire Repair and Maintenance; Transit/Instrument Man
- WAGES:(per hour)
- Additional $0.75 for Survey work Tunnel under compressed air.
- Additional $0.50 for Hydrographic work.
- *The $5.00 is added to the Class Base Wage for all hours paid. Additionally, the $5.00 is subject to the V-Code listed on the OVERTIME CODE Sheet.
- **The $5.50 is added to the Class Base Wage for all hours paid. Additionally, the $5.50 is subject to the V-Code listed on the OVERTIME CODE Sheet.
- ***Outside Material Hoist (Class B) receives additional $1.00 per hour on 110 feet up to 199 feet total height, $2.00 per hour on 200 feet and over total height.
- - On hazardous waste removal work of any kind, including state or federally designated site where the operating engineer is required to wear level A, B, or C personal protection the operating engineer shall receive an hourly wage rate of his regular hourly wage plus $5.00 per hour. An operating engineer working at a hazardous waste removal project or site at a task requiring hazardous waste related certification, but who is not working in a zone requiring level A, B, or C personal protection, shall receive an hourly wage rate of his regular rate plus $1.00 per hour. This shall also apply to sites where the level D personal protection is required.
- *15% premium is also required on shift work benefits
More from NYSDOL on this rate
- NYSDOL's Article 8 schedules
- These are journeyworker rates. Only apprentices individually registered in a NYSDOL-registered program may be paid apprentice rates (Labor Law §220(3-e)).
Every trade's rates, county by county: Delaware · Orange · Rockland · Sullivan · Ulster
Are you being paid this rate?
Add your hourly wage to the supplements your employer pays for you (benefits or cash), and compare it with the total. Contractors need a Contractor Registry certificate and file certified payroll electronically with NYSDOL. NYSDOL Bureau of Public Work: dol.ny.gov/prevailing-wage.
Source
Department of Labor (NYSDOL), 2026-27 schedules, with the October 1, 2026 updates. For the row this page leads with:
- Delaware: NYSDOL-11-825, page 29
- Orange: NYSDOL-11-825, page 28
- Rockland: NYSDOL-11-825, page 26
- Sullivan: NYSDOL-11-825, page 25
- Ulster: NYSDOL-11-825, page 25
We read every NYSDOL job description and county schedule for 2026-27, with the monthly updates through October 1, 2026, and the NYC Comptroller's schedule, and check every number with a second read. Neither agency prints a total; ours is wage plus supplements. How we check · Download every New York rate as CSV · Report an error