Home / Wisconsin / Sheet Metal Worker / Oneida County group
Wisconsin · Sheet Metal Worker · 3 counties
Sheet Metal Worker prevailing wage, Oneida County group, Wisconsin (3 counties)
DOL sets the same sheet metal worker rates, row for row, in 3 counties: Langlade, Lincoln and Oneida. Every figure on this page applies in each of them.
$52.64an hour, base wage + fringe benefits (our sum)
$31.97 base wage + $20.67 fringe benefits
SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) · SHEE0010-035
$29.00an hour, base wage + fringe benefits (our sum)
$27.74 base wage + $1.26 fringe benefits
SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) · SUWI2012-005
On federally funded or assisted building construction in each of these 3 counties, a sheet metal worker must be paid at least $52.64 an hour: a $31.97 base wage plus $20.67 in fringe benefits, under wage determination WI20260011 (modification 1). DOL prints no total, so $52.64 is our sum of the two.
Wage determination WI20260011, modification 1, published May 18, 2026, for building construction; rate identifier SHEE0010-035 (June 5, 2023). Checked against sam.gov on October 25, 2026.
On federally funded or assisted residential construction in each of these 3 counties, a sheet metal worker must be paid at least $29.00 an hour: a $27.74 base wage plus $1.26 in fringe benefits, under wage determination WI20260021 (modification 1). DOL prints no total, so $29.00 is our sum of the two.
Wage determination WI20260021, modification 1, published May 18, 2026, for residential construction; rate identifier SUWI2012-005 (April 4, 2012). Checked against sam.gov on October 25, 2026.
Davis-Bacon is the only prevailing wage here (federally funded or assisted work). Wisconsin repealed its local law from January 1, 2017 and its state law for projects bid after September 23, 2017 (2017 Act 59; WisDOT).
DOL lists 3 sheet metal worker rates for each of these counties, from $29.00 to $75.37 an hour. See all of them.
Base wage and fringe benefits: $31.97 + $20.67
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $31.97 |
| Fringe benefits (one figure, not itemized) | $20.67 |
| Base + fringe benefits (our sum; DOL prints no total) | $52.64 |
Base wage and fringe benefits: $27.74 + $1.26
The base wage is the taxable hourly wage. DOL prints the fringe benefits as one hourly figure, not itemized; it can go to health, pension, vacation and training plans, or be paid as cash where the state allows.
| Base wage (taxable) | $27.74 |
| Fringe benefits (one figure, not itemized) | $1.26 |
| Base + fringe benefits (our sum; DOL prints no total) | $29.00 |
When does this rate change?
- A contract keeps the wage determination in its bid documents. Modifications published before bid opening apply to it, though one published less than 10 days before can be left out if the agency finds there isn't time to tell bidders (29 CFR 1.6(c)).
- DOL changes a WD by publishing a numbered modification on SAM.gov. This page reads the modification named in the Source line; the Wisconsin change log lists what each one changed.
Every sheet metal worker rate in the Oneida County group
As DOL lists them. The highlighted row is the one this page leads with.
- SHEET METAL WORKER: INCLUDING HVAC WORK (LANGLADE, LINCOLN, ONEIDA, PORTAGE, AND WOOD COUNTIES)Building · SHEE0018-036$75.37
- SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)Building · SHEE0010-035$52.64
- SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)Residential · SUWI2012-005$29.00
| Classification | Base wage | Fringe benefits | Total rate | WD |
|---|---|---|---|---|
| SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)BuildingSHEE0010-035 | $31.97 | $20.67 | $52.64 | WI20260011 Mod 1 |
| SHEET METAL WORKER: INCLUDING HVAC WORK (LANGLADE, LINCOLN, ONEIDA, PORTAGE, AND WOOD COUNTIES)BuildingSHEE0018-036 | $42.90 | $32.47 | $75.37 | WI20260011 Mod 1 |
| SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY)ResidentialSUWI2012-005 | $27.74 | $1.26 | $29.00 | WI20260021 Mod 1 |
How the Oneida County group compares
The main sheet metal worker rate in every county that has one, and how the pay splits here and nearby. All bars use the same scale.
Every county in Wisconsin
Wage and fringe benefits, nearby
- Oneida County groupbase $31.97$52.64
- Vilas Countybase $31.97$52.64
- Lincoln Countybase $31.97$52.64
- Marathon Countybase $42.90$75.37
Which county is in which sheet metal worker group
Every Wisconsin county with a sheet metal worker rate. Counties DOL treats alike share one page; the rest have their own.
| Counties | Main classification | Base wage | Total rate |
|---|---|---|---|
| Washington County group, 2 localities: Ozaukee, Washington | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $58.03 | $88.01 |
| Milwaukee County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $58.03 | $88.01 |
| Waukesha County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $58.03 | $88.01 |
| Kenosha County | SHEET METAL WORKER | $48.92 | $87.13 |
| Racine County | SHEET METAL WORKER | $48.92 | $87.13 |
| Dane County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $51.92 | $86.70 |
| Rock County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $48.51 | $84.37 |
| Brown County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $46.47 | $77.80 |
| Outagamie County | SHEET METAL WORKER: INCLUDING HVAC DUCT WORK AND TECHNICIAN (OUTAGAMIE AND WINNEBAGO COUNTIES) | $46.47 | $77.80 |
| Winnebago County | SHEET METAL WORKER: INCLUDING HVAC DUCT WORK AND TECHNICIAN (OUTAGAMIE AND WINNEBAGO COUNTIES) | $46.47 | $77.80 |
| Calumet County | SHEET METAL WORKER: INCLUDING HVAC DUCT WORK AND TECHNICIAN (CALUMET & SHEBOYGAN COUNTIES) | $45.07 | $76.11 |
| Sheboygan County | SHEET METAL WORKER: INCLUDING HVAC DUCT WORK AND TECHNICIAN (CALUMET & SHEBOYGAN COUNTIES) | $45.07 | $76.11 |
| Marathon County | SHEET METAL WORKER (INCLUDING HVAC WORK) | $42.90 | $75.37 |
| La Crosse County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $45.63 | $74.65 |
| St. Croix County group, 2 localities: Pierce, St. Croix | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $42.00 | $73.56 |
| Chippewa County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $42.00 | $73.56 |
| Eau Claire County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $42.00 | $73.56 |
| Waupaca County group, 9 localities: Adams, Florence, Green Lake, Marinette, Marquette, Menominee, Shawano, Waupaca, Waushara | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Barron County group, 7 localities: Barron, Burnett, Polk, Price, Sawyer, Taylor, Washburn | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Dunn County group, 6 localities: Buffalo, Clark, Dunn, Jackson, Pepin, Trempealeau | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Grant County group, 4 localities: Crawford, Grant, Richland, Vernon | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Oneida County group, 3 localities: Langlade, Lincoln, Oneida | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Bayfield County group, 2 localities: Bayfield, Iron | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Dodge County group, 2 localities: Dodge, Jefferson | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Oconto County group, 2 localities: Kewaunee, Oconto | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Wood County group, 2 localities: Portage, Wood | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Ashland County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Columbia County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Door County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Fond du Lac County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Forest County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Green County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Iowa County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Juneau County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Lafayette County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Manitowoc County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Monroe County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Rusk County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Sauk County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Vilas County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Walworth County | SHEET METAL WORKER (HVAC DUCT INSTALLATION ONLY) | $31.97 | $52.64 |
| Douglas County | SHEET METAL WORKER (INCLUDING HVAC DUCT WORK AND TECHNICIANS) | $31.61 | $48.13 |
11 groups of counties with identical DOL rates, and 31 counties with rates of their own.
Wisconsin sheet metal worker prevailing wage by county, with a map
More from DOL on this rate
- SAM.gov wage determinations
- Davis-Bacon determinations list journeyworker rates. Apprentices in a program registered with DOL or a recognized state agency can be paid the program's percentage of the rate, within its ratio; anyone else gets the full rate (29 CFR 5.5(a)(4)).
Every trade's rates, county by county: Langlade · Lincoln · Oneida
Are you being paid this rate?
Add your base pay to the fringe your employer pays for you, in cash or into plans, and compare the sum with the total. The Department of Labor's Wage and Hour Division takes complaints: 1-866-487-9243, or dol.gov/agencies/whd/contact/complaints.
Source
U.S. Department of Labor, Wage and Hour Division (DOL), Davis-Bacon wage determinations on SAM.gov, as of October 25, 2026. For the row this page leads with:
- Langlade: WI20260011 Mod 1
- Lincoln: WI20260011 Mod 1
- Oneida: WI20260011 Mod 1
We read every active Wisconsin Davis-Bacon wage determination from SAM.gov's own data and check every number with a second, independent read of the same file. DOL prints no total; ours is base plus fringe. How we check · Download every Wisconsin rate as CSV · Report an error